Security Labs SLX912 Bedienungshandbuch PDF herunterladen (Seite 12)

Figure 2. DATE / TIME display location

? When the MONITOR OUT DATE / TIME is set to “ON”, the DATE / TIME will be shown on the

MONITOR OUT display.

? When the VCR OUT DATE / TIME is set to “ON”, the DATE / TIME will be shown on the

QUAD OUT display.

? SEQUENCE: There are eight positions to select and setup the random switching sequence.

Where: Q? QUAD display; 1? CH1 Full display; 2? CH2 Full display; 3? CH3 Full display; 4

? CH4 Full display; ? Skip.

?NOTICE:

? In AUTO-SWITCH MODE channels that are disconnected or have video loss will automatically be

skipped.

? When no sequence is set in the AUTO SEQUENCE MODE, “NO SEQUENCE SETTING” will be

displayed on the monitor, which activates the buzzer alarm.

? DWELL TIME: Sets the interval time corresponding to each sequence position. (Time range: 0~9

seconds.)

?NOTICE:

? When all dwell times are set to 0 in the AUTO SEQUENCE MODE, “NO SEQUENCE TIME

SETTING” will be displayed on the monitor, which activates the buzzer alarm.

? When no sequence is set and all dwell times are set to 0 in the AUTO SEQUENCE MODE,

“SEQUENCE SETTING ERROR” will be displayed on the monitor, which activates the buzzer alarm.

3.2.4.3 DISPLAY SETUP.

CH1: CH2:

BRIGHT 64 BRIGHT 64

CONTRAST 64 CONTRAST 64

HUE 80 HUE 80

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Security Labs SLX912 Bedienungshandbuch Seite 12